Shear Gates
General Information
| Available End Connections | Size Range | Style No. |
|---|---|---|
Flanged End Frame Standard End |
4”-30” 4"-30" |
F-3000 F-3002 |
Note: Flanged End Frame and Standard Frame are faced and drilled to ANSI 125lb. template.
Accessories / Options:
Lifting Handle & Hooks
Suggested Specifications:
- Shear gate shall be full opening; circular port, iron body bronze mounted design and furnished with flanged ends.
- The body (frame), gate and wedges shall be of cast iron conforming to ASTM specification A-126 Class B.
- The valve shall be furnished with a wedge bolted to the body so they can easily be removed and replaced due to wear.
- The gate shall be sturdily proportioned and pivot on a solid bronze hinge bolt.
- The bronze gate (seat ring shall be rolled into a dovetailed groove under pressure to make one inseparable unit. The bronze gate ring face shall be machined to a smooth finish. The body seat ring shall be bronze, threaded and screwed into place and the face machined to a smooth finish.
- Lift rods are used to manually raise and lower the Shear Gate disc from a position above the gate. A cast iron catch hook may be adjusted on the lift rod to allow the rod to be hung on a hanger placed in the wall. Lift rod material is ¾” dia. Carbon steel. Catch and loop handle are cast iron. Lift rods may be made to specified length in 6” increments.
FAQ's
No FAQ's available at this time. Please check back at a later date.
Operation Manual
No manual available at this time. Please check back at a later date.